How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique procedure to add a second key. It requires dealer service with a handheld computer dubbed Tech-2. Then the transponder must be replaced and a key are required to be purchased.
Rotate your keys to prevent one from wearing out more than the other. This will also help to keep your keys in top condition.
Replacement Case
In contrast to the traditional Saab keys of the past keys, the latest key fobs contain electronics which makes it hard to make a copy. This has made stealing cars much more difficult than twenty years ago. However, it has also made the replacement of lost keys an incredibly expensive task.
Every owner of a Saab 9-3 needs to have at least two functioning keys. It is expensive to replace a lost key as it requires replacing the CIM module, as well as programming the locking cylinders. Dealers charge between $100-$200 to do this.
There are options to avoid these costly costs. Some parts suppliers will search for the code from an old key (usually the same one that opens the doors and turns on the ignition) and cut a new key blade out of metal for only a fraction of the dealer's cost. The key must be the exact same as the original for it to work in your vehicle.
Follow these steps to replace the case. You will need to have an open-faced screwdriver and patience. With the screwdriver, you can pry apart the plastic, and then take off the emergency key. Once you have the case open, take the electronics out and put them in the new case. Put the correct key and badge into the case.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive component that can be easily and quickly replaced. The YouTube video of Cyclone Cyd demonstrates how you can replace the remote fob battery in just four easy steps. This tutorial can be used with any modern Saab key fob. However, the procedure might differ slightly.
This button is usually placed just below the Saab logo on the back of the fob. This button is typically located on the back of the fob, next to the Saab Logo. Use a flathead to insert the screwdriver into the tiny hole in this button. This should be enough to allow you to open the fob case to allow you to change the battery.
After the new battery CR1632 is installed, you can reassemble the remote key fob and then program it to your car. The entire process should not exceed an hour. This is a very easy process that doesn't require any special tools.
The process is more complicated if you lose your key, but it is possible. The dealer has to first verify the VIN of the vehicle and then order a replacement TWICE module and key blade that is matched to the unique code. After that, they'll have to cut the replacement key and then program it using the latest software tool known as MDI.
Replacement Key Fob
The key fob is the device that locks and unlocks your car. It has a battery inside. Batteries have a limited lifespan and eventually will die. This is a frequent issue with all cars. The good news is that you can change the batteries in most key fobs without having to replace the entire case. You can purchase replacement fobs from Amazon that have all the electronics already installed, which means you can simply open the case and replace the batteries that were in the case. You'll need to remove the emergency key before you replace the batteries. To do this, place an small screwdriver with a flat head into the slot that is in the middle of the. The case will split when you move the screwdriver around it.
When you are ready to replace the keys ensure you have spare keys, because this can cut down the total cost by a significant amount. If click this link have an extra key, ask the dealer to cut it in half and program it to your car. This is a lot less expensive than purchasing a new key fob.
If you do not have a spare key one, you can add an additional key to your car, but it requires a lot of research and effort. It costs a few hundred dollars to add an additional car key. The computer of the car also needs to be programmed. Professionals can accomplish this however it's a costly option.
Replacement Ignition
The modern SAAB 9-3 features an advanced alarm system built around a key code. If you lose your only key, it may be expensive to add another one because the car must have a specific computer installed and also be programmed to accept a new key. Dealers can charge hundreds of dollars to program an entirely new key, in the event that they are unable to complete the task.
If you've lost the only working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge top dollar for it. We can reprogram the EEPROM on your car's computer to be ready to accept an additional key. This will save you more than 50% off the cost you would pay at a dealer.
If you've been an owner of an 03-11 SAAB 9-3, then you probably know that the ignition key isn't really all that durable. If the ignition key you have isn't working correctly, you should think about replacing it. They can become sticky and the buttons have been known to fall off. It's not so difficult as it may seem to replace the ignition key. With the right tools, it is able to be accomplished quickly.